Zoom

  • Increase
  • Normal

ContrastHigh|Normal

Dr.R.Sakthivel

Home » Dr.R.Sakthivel
sakthivelr's picture
Name: 
Dr.R.Sakthivel
Earned Degree/Diploma: 
M.E (Thermal Engg)., Ph.D.
Current Designation: 
Assistant Professor
Department: 
Mechanical Engineering
Contact Phone Number: 
9943342236
Email (Official Preferred): 
rsakthivel@gct.ac.in
Publications: 

CAREER OBJECTIVE:

Aspiring to work in a position that enable to use my educational and research skills with greater responsibility for the betterment of student community and growth of the Institution.

AREA OF SPECIALIZATION:

  • Biomass energy conversion
  • Pyrolysis kinetics
  • Advanced combustion strategies

BOOKS PUBLISHED:

  1. R. Sakthivel, Faisal O. Mahroogi, S. Narayan, S. Abudbaker, M. U. Kaisan, Youssef Alammari, “Introduction to Automotive Engineering” Wiley Scrivener Publishing, March 2019, ISBN: 978-1-119-48005-1.

BOOK CHAPTERS PUBLISHED:

  1. R.Sakthivel et al., “Emission aspects of biomass based advanced second generation biofuels in IC engines” in book “Recent technologies for enhancing performance and reducing emissions in diesel engines”, IGI Global publications, Feb 2020, ISBN13: 9781799825395
  2. A.Tamilvanan, T.Mohanraj, R.Sakthivel, “Influence of nano-particle additives on bio-diesel fuelled CI engines: A Review” in book “Recent technologies for enhancing performance and reducing emissions in diesel engines”, IGI Global publications, Feb 2020, ISBN13: 9781799825395
  3. R.Sakthivel et al, “Use of optimization techniques to study the engine performance and emission analysis of Diesel engine” in book “ Liquid biofuels: Fundamentals, Characteristics and applications”, Wiley Scrivener publications, June 2021, ISBN: 978-1-119-79198-0
  4. R.Sakthivel et al, “Waste to liquid fuels: potency, progress and challenges” in book “Advanced technology for the conversion of waste into fuels and chemical- Vol I: Biological Processes”, Woodhead publications (Elsevier), July 2021, ISBN: 9780128231395
  5. JJ Marshal, SY Samuel, KG Sundari, R.Sakthivel, “Diesel engine performance and emissions with fuels derived from waste tyres” in book “Advanced technology for the conversion of waste into fuels and chemical- Vol I: Biological Processes”, Woodhead publications (Elsevier), July 2021, ISBN: 9780128231395
  6. R.Sakthivel, Sidharth S, Ganeshkumar P, Mohanraj T, Tamilvanan A, Ashok B, “Effect of engine design parameters in NOx reduction” In book: NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines, Elsevier Publications, 2022, ISBN: 9780128239551
  7. Tamilvanan A, Ashok B, Mohanraj T, Jayalakshmi P, Dhamodharan P, R.Sakthivel, “Effect of engine operating parameters in NOx reduction”In book: NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines, Elsevier Publications, 2022, ISBN: 9780128239551
  8. Dandu MSR, Nanthagopal K, Ashok B, Dhinesh B, Sakthivel R, “Impact of NOx control measures on engine life” In book: NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines, Elsevier Publications, 2022, ISBN: 9780128239551.
  9. R.Sakthivel, Mohanraj T, Ganeshkumar P, Sukhapradha V, “Prediction and optimization of CI engine performance fuelled with biodiesel-diesel blend using Response Surface Methodology”, Green Energy and Technology, In: Edwin Geo, V., Aloui, F. (eds) Energy and Exergy for Sustainable and Clean Environment, Volume 1. Green Energy and Technology. Springer, Singapore, 2022, pp 175-189  https://doi.org/10.1007/978-981-16-8278-0_12
  10. R.Sakthivel, Harshini GV, Vardhan MS, Vinod A, Gomathi K, “Biomass energy conversion through pyrolysis: A ray of hope for the current energy crisis”, In book: Green energy systems: Design, Modelling, Synthesis and Applications, Elsevier Publications, 2022, ISBN: 978-032395108-1
  11. R.Sakthivel, et al, “Biofuels: Classification, conversion technologies, optimization techniques and applications”, In book: Biorefineries: Production of fuels and platform chemicals, 2023, pp. 1-30, Wiley Publications. https://doi.org/10.1002/9781119724872.ch1

JOURNALS PUBLISHED:

  1. Sakthivel R, Tamilarasan N, Kumar PS, Hari SDS, Mathesh V,Kumar SP, “Kinetic and thermodynamic analysis of Borassus flabellifer bark pyrolysis for effective production of biofuel” SPRINGER Publications, Biomass Conversion and Biorefinery, pp 1-10, 2023. Scopus, SCI (Impact factor: 4)
  2.  Van Giao Nguyen, Sakthivel Rajamohan, Krzysztof Rudzki, Janusz Kozak, Prabhakar Sharma, Nguyen Dang Khoa Pham, Phuoc Quy Phong Nguyen, Phuong Nguyen Xuan, “Using Artificial Neural Networks For Predicting Ship Fuel Consumption” Polish Maritime Research No.2 (118) 2023 Vol. 30; pp. 39-60. Scopus, SCI (Impact factor: 2)
  3. Sakthivel Rajamohan, Shravan Chidambaresh, Hemanth Sundarrajan, Sivasailam Balakrishnan, Ranjna Sirohi, Dao Nam Cao, Anh Tuan Hoang, “ Investigation of thermodynamic and kinetic parameters of Albizia lebbeck seed pods using thermogravimetric analysis”, ELSEVIER Science Ltd. Bioresource Technology. Vol 384, 2023, pp.129333. Scopus, SCI (Impact factor: 11.889). https://doi.org/10.1016/j.biortech.2023.129333.
  4. Sakthivel R, Krishna Prakash J, Kanagaraj S, Akash S, TT Le, “Insight into the Thermodynamic and Kinetic analysis of Tamarindus indica shell using Thermogravimetric Analysis” TAYLOR AND FRANCIS Publications. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. Published online July 2023. Scopus, SCI (Impact factor: 2.902). DOI: 10.1080/15567036.2023.2232328
  5. Van Nhanh Nguyen, Thanh Lanh Le, Xuan Quang Duong, Van Vang Le, Dinh Tuyen Nguyen, Phuoc Quy Phong Nguyen, Sakthivel Rajamohan, Anh Vu Vo, Huu Son Le, “Application of phase change materials in improving the performance of refrigeration systems” ELSEVIER Science Ltd. Sustainable Energy Technologies and Assessments. Vol.56, pp.103097, 2023. Scopus, SCI (Impact factor: 7.632).    
  6. Van Nhanh Nguyen, Nguyen Dang Khoa Pham, Xuan Quang Duong, Viet Dung Tran, Minh Tuan Pham, Sakthivel Rajamohan, Xuan Tuan Cao, Thanh Hai Truong, “Combination of solar with organic Rankine cycle as a potential solution for clean energy production,”ELSEVIER Science Ltd. Sustainable Energy Technologies and Assessments. Vol.57, pp.103161, 2023. Scopus, SCI (Impact factor: 7.632).     
  7. Mohanapriya V, Sakthivel R, Pham NDK, Cheng CK, Le HS, Dong, TMH, “Nanotechnology-A ray of hope for heavy metals removal” ELSEVIER Science Ltd. Chemosphere.Vol 311, Jan 2023, pp.136989. Scopus, SCI (Impact factor: 8.943).     
  8. Sakthivel R, Vinod A, Adithya M, Harshini GV, Nhanh NV, Arici M, Nizetic S, Thai LT, Hidayat R, “Approaches in performance and structural analysis of wind turbines-A review” ELSEVIER Science Ltd. Sustainable Energy Technologies and Assessments. Vol.53, pp.102570, 2022. Scopus, SCI (Impact factor: 7.632).     
  9. Baranitharan P, Sriariyanun M, Babu D, Sakthivel R, “Dual feedstock pyrolysis of Aegle marmelos pressed seed cake and novel Annona squamosal seed particles: the effect of dual natural antioxidant on the oxidation stability of derived co-pyrolysis liquid – A green approach” Biofuels, Vol.14:5, pp.485-497, DOI: 10.1080/17597269.2022.2151402 . Scopus (Impact factor: 2.73)
  10. Tamilarasan N, Sakthivel R, Balaji K, “Influence of metal oxide catalyst on co-pyrolysis of biomass and COVID-19 waste” Environmental Technology, Published online Aug 2022, Scopus, SCI (Impact factor: 3.475)
  11. Sakthivel R, Sidharth S, Shanthinath, Abbhijith H, Nguyen VN, Engle D, Ahmed SF, Le TH, “Optimization of operating parameters for diesel engine fuelled with bio-oil derived from cottonseed pyrolysis”, ELSEVIER Science Ltd. Sustainable Energy Technologies and Assessments. Vol.52, pp.102202, April 2022. Scopus, SCI (Impact factor: 7.632).
  12. Baranitharan P, Sakthivel R, Anand K, Bhuvaneshkumar M, Balaji NS, “Investigation of diesel engine distinctiveness fuelled by Aegle marmelos pyrolysis oil-CuO nanoparticles-diesel modified opus with the aid of Infra-Red thermal images-A novel study” Iranian Journal of Chemistry and Chemical Engineering, Published Online. Scopus (Impact factor: 1.903)
  13. Hoang AT, Pandey A, Huang Z, Luque R, Ng KH, Papadopoulos AM, Chen WH, Sakthivel R, Hadiyanto, Nguyen XP, Pham VV, “Catalyst-Based Synthesis of 2,5-Dimethylfuran from Carbohydrates as a Sustainable Biofuel Production Route” ACS Sustainable Chemistry & Engineering, Vol 10, pp.3079, 2022. Scopus, WoS (Impact factor: 9.224 ) https://doi.org/10.1021/acssuschemeng.1c06363
  14. Sakthivel R, Abbhijith H, Karthicraja M, Huang Z, Baranitharan P, Tamilvanan A, Nguyrn X, Le AT, Hoang AT, “Evaluation of oxidation stability and engine behaviors operated by Prosopis juliflora biodiesel/diesel fuel blends with presence of synthetic antioxidant” ELSEVIER Science Ltd. Sustainable Energy Technologies and Assessments. Vol.52, pp.102086, Feb 2022. Scopus, SCI (Impact factor: 7.632).     
  15. Chen WH, Nizetic S, Sirohi R, Huang Z, Hoang AT, Luque R, Papadopoulos AM, Sakthivel R, Nguyen XP, “Liquid hot water as sustainable biomass pretreatment technique for bioenergy production: A review” ELSEVIER Science Ltd. Bioresource Technology. Vol 344A, pp. 12607, 2022. Scopus, SCI (Impact factor: 11.889). https://doi.org/10.1016/j.biortech.2021.126207
  16. Hoang AT, Ong HC, Fattah IMR, Chong CT, Cheng CK, Sakthivel R, Ok YS, “Progress on the lignocellulosic  biomass pyrolysis for biofuel production toward environmental sustainability” ELSEVIER Science Ltd. Fuel Processing Technology. Vol.223, pp.106997, December 2021. Scopus, SCI (Impact factor: 8.129).
  17. Bui VG, Bui TMT, Hoang AT, Nizetic S, Sakthivel R, Tran VN, Bui VH, Engel D, Hadiyanto H, “Energy Storage onboard zero-emission two wheelers: Challenges and technical solutions” ELSEVIER Science Ltd. Sustainable Energy Technologies and Assessments. Vol.47, pp.101435, October 2021. Scopus, SCI (Impact factor: 7.632). https://doi.org/10.1016/j.seta.2021.101435
  18. Sakthivel R, Mohanraj T, Ganeshkumar P, Sukhapradha V, Anoop R, “Optimization of performance and emission characteristics of compression ignition engine powered with Azolla pinnata fuel blends - A Response Surface Methodology approach” TAYLOR AND FRANCIS Publications. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. Published online 11 May 2021. Scopus (Impact factor: 2.902)
  19. Gomathi K, Sakthivel R, JJ Marshal, Pratheep V, “Design, Fabrication, and Performance Analysis of Intelligent Mesoscale Capacitive Accelerometer for Vibration Measurement” Journal of Testing and Evaluation, ASTM, Vol.49, No.4, July/August 2021. Scopus, Thomson Reuters Indexed (Impact factor: 0.877). https://doi.org/10.1520/JTE20200176.
  20. Sakthivel R, Marshal JJ, Sidharth S, “Derivation of synthetic fuel from waste plastic: Investigation of engine operating characteristics on DI diesel engine” SPRINGER Publications. Environmental Science and Pollution Research. Vol 28, PP 11976-987, 2021. Scopus, SCI (Impact factor: 5.190). https://doi.org/10.1007/s11356-020-08625-3
  21. Narayanan S, Ramesh K, Sakthivel R, “Optimization of nozzle hole number for a diesel engine fueled with kapok methyl ester blend” TAYLOR AND FRANCIS Publications. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. Vol.45:3, pp 7423-35, 2023. DOI: 10.1080/15567036.2019.1675817 Scopus (Impact factor: 2.902).
  22. Baranitharan P, Ramesh K, Sakthivel R, “Investigation and improvement on storage stability of pyrolysis oil obtained from Aegle marmelos de-oiled seed cake” TAYLOR AND FRANCIS Publications. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. Vol.43, PP 953-967, 2021. Scopus (Impact factor: 2.902).
  23. Baranitharan P, Ramesh K, Sakthivel R, “Multi-attribute decision-making approach for Aegle marmelos pyrolysis process using TOPSIS and Grey Relational Analysis: Assessment of engine emissions through novel Infrared thermography” ELSEVIER Science Ltd. Journal of Cleaner Production. Vol.234, pp.315-328, October 2019. Scopus (Impact factor: 11.072).
  24. Baranitharan P, Ramesh K, Sakthivel R, “Measurement of performance and emission distinctiveness of Aegle marmelos seed cake pyrolysis oil/diesel/TBHQ opus powered in a DI diesel engine using ANN and RSM” ELSEVIER Science Ltd. Measurement. Vol.144, pp.366-380, October 2019. Scopus, Thomson Reuters Indexed (Impact factor: 5.131).
  25. Anbarasan T, Jayanthi S, Sakthivel R, “Generation of biodiesel from industrial wastewater using oleaginous yeast: performance and emission characteristics of microbial biodiesel and its blends on a compression injection diesel engine” SPRINGER Publications. Environmental Science and Pollution Research. April 2019, Vol.26, Issue 11, pp 11371-11386. Scopus, Thomson Reuters Indexed (Impact factor: 5.190). https://doi.org/10.1007/s11356-019-04556-w
  26. Ramesh K, Baranitharan P, Sakthivel R, “Experimental assessment and multi-response optimization of diesel engine performance and emission characteristics fuelled with Aegle marmelos seed cake pyrolysis oil-diesel blends using Grey relational analysis coupled principal component analysis” SPRINGER Publications. Environmental Science and Pollution Research. March 2019, Vol.26, Issue 7, pp 6980-7004. Scopus, Thomson Reuters Indexed (Impact factor: 5.190). https://doi.org/10.1007/s11356-019-04164-8
  27. Sakthivel R, Ramesh K, Marshal JJ, Sadasivuni KK, “Prediction of performance and emission characteristics of diesel engine fuelled with waste biomass pyrolysis oil using response surface methodology” ELSEVIER Science Ltd. Renewable Energy. Volume 136, June 2019, Pages 91-103. Scopus, Thomson Reuters Indexed (Impact factor: 8.634). https://doi.org/10.1016/j.renene.2018.12.109
  28. Vadivel N, Somasundaram P, Krishnamoorthi M, Sakthivel R, “Experimental investigation and exergy analysis on homogeneous charge compression ignition engine fueled with natural gas and diethyl ether ” SPRINGER Publications. Environmental Science and Pollution Research. March 2019, Vol.26, Issue 7, pp 6677-6695. Scopus, Thomson Reuters Indexed (Impact factor: 5.190). https://doi.org/10.1007/s11356-018-04089-8
  29. Ramesh K, Baranitharan P, Sakthivel R, “Analytical characterization of the Aegle marmelos pyrolysis products and investigation on the suitability of bio-oil as a third generation bio-fuel for C.I Engine” Wiley Publications, Environmental Progress&Sustainable Energy, Vol.38, Issue 4, PP 13116, Jul/Aug 2019. Scopus (Impact factor: 1.989). https://doi.org/10.1002/ep.13116
  30. Krishnamoorthi M, Malayalamoorthy R, Sakthivel R, “Optimization of compression ignition engine fuelled with diesel - chaulmoogra oil - diethyl ether blend with engine parameters and exhaust gas recirculation” ELSEVIER Science Ltd. Renewable Energy. April 2019,Vol.134, pp.579-602 Scopus, Thomson Reuters Indexed (Impact factor: 8.634). https://doi.org/10.1016/j.renene.2018.11.062
  31. Ramesh K, Baranitharan P, Sakthivel R, “Characterization of pyrolysis bio-oil derived from intermediate pyrolysis of Aegle marmelos de-oiled cake: Study on performance and emission characteristics of C.I. engine fuelled with Aegle marmelos pyrolysis oil blends” SPRINGER Publications. Environmental Science and Pollution Research. Nov 2018, Vol.25 (3), pp 33806-819. Scopus, Thomson Reuters Indexed (IF: 5.190). DOI: 10.1007/s11356-018-3319-x
  32. Ramesh K, Baranitharan P, Sakthivel R, “Investigation of the stability on boring tool attached with double impact dampers using Taguchi based Grey analysis and cutting tool temperature investigation through FLUKE-Thermal imager” ELSEVIER Science Ltd. Measurement. Vol.131, pp.143-155, January 2019. Scopus, Thomson Reuters Indexed (Impact factor: 5.131).
  33. Sakthivel R, Ramesh K “Studies on the effects storage stability of bio-oil obtained from pyrolysis of Calophyllum inophyllum deoiled seed cake on the performance and emission characteristics of a direct injection diesel engine” SPRINGER Publications. Environmental Science and Pollution Research. June 2018, Vol.25, Issue.18, pp.17749-17767. Scopus, Thomson Reuters Indexed (Impact factor: 5.190).
  34. Sakthivel R, Ramesh K, Mohamed Shameer P and Purnachandran R “Experimental investigation on improvement of storage stability of bio-oil derived from intermediate pyrolysis of Calophyllum inophyllum seed cake ” ELSEVIER Science Ltd. Journal of the Energy Institute. Volume 92, Issue 3, June 2019, Pages 768-782 (https://doi.org/10.1016/j.joei.2018.02.006).                              Scopus, Thomson Reuters Indexed (Impact factor: 6.47)
  35. Purnachandran R, Ramesh K, Sakthivel R and Mohamed Shameer P “Assessment of n-pentanol/Calophyllum inophyllum/diesel blends on the performance, emission and combustion characteristics of a constant speed variable compression ratio Direct Injection diesel engine” SPRINGER Publications. Environmental Science and Pollution Research. May 2018, Vol.25(14), pp.13731-13744(https://doi.org/10.1007/s11356-018-1566-5)Scopus, Thomson Reuters Indexed (Impact factor: 5.190)
  36. Sakthivel R, Ramesh K, Mohamed Shameer P and Purnachandran R “A Complete analytical characterization of products obtained from pyrolysis of wood barks of Calophyllum inophyllum”. SPRINGER Publications. Waste and Biomass valorization. Vol. 10,  PP. 2319–2333 (2019) (https://doi.org/10.1007/s12649-018-0236-7) Scopus, Thomson Reuters Indexed (Impact factor: 3.449)
  37. Sakthivel R, Ramesh K “Analytical characterization of products obtained from slow pyrolysis of Calophyllum inophyllum seed cake: study on performance and emission characteristics of direct injection diesel engine fuelled with bio-oil blends”. SPRINGER Publications. Environmental Science and Pollution Research. Vol.25, Issue 10, pp.9523-38. April 2018 (DOI: 10.1007/s11356-018-1241-x) Scopus, Thomson Reuters Indexed (Impact factor: 5.190)
  38. Sakthivel R, Ramesh K, Purnachandran R and Mohamed Shameer P. “A review on the properties, performance and emission aspects of the third generation biodiesels”. ELSEVIER Science Ltd. Renewable and Sustainable Energy Reviews vol.82, pp.2970-2992. January 2018.  Scopus, Thomson Reuters Indexed (Impact factor: 16.799)
  39. Sakthivel R, Ramesh K “Influence of temperature on yield, composition and properties of the sub-fractions derived from slow pyrolysis of Calophyllum inophyllum de-oiled cake” ELSEVIER Science Ltd. Journal of Analytical and Applied Pyrolysis vol.127, pp.159-169. September 2017. Scopus, Thomson Reuters Indexed (Impact factor: 6.437)
  40. Mohamed Shameer P, Ramesh K, Purnachandran R and Sakthivel R, “Effects of injection timing and injection pressure on biodiesel fuelled engine performance characteristics: A review”. Asian Journal of Research in Social Sciences and Humanities vol.7 (2), pp. 310-330. February 2017
  41. Mohamed Shameer P, Ramesh K, Sakthivel R and Purnachandran R, “Experimental Evaluation on Oxidation Stability of Biodiesel/Diesel Blends with Alcohol Addition by Rancimat Instrument and FTIR Spectroscopy”. SPRINGER Publications. Journal of Mechanical Science and Technology vol.31 (1), pp.455-463. January 2017. Scopus, Thomson Reuters Indexed (Impact factor: 1.810)
  42. Mohamed Shameer P, Ramesh K, Sakthivel R and Purnachandran R, “Assessment on the influence of compression ratio on the performance, emission and combustion characteristics of diesel engine fuelled with biodiesel”. Asian Journal of Research in Social Sciences and Humanities, Vol. 6, No. 12, pp. 344-372. December 2016
  43. Mohamed Shameer P, Ramesh K, Sakthivel R and Purnachandran R, “Studies on correlation between NOx and Incylinder temperature in a D.I diesel engine using FLUKE Thermal Imager for different alternate fuel blends”. Asian Journal of Research in Social Sciences and Humanities, Vol. 6, No. 12, pp. 373-389. December 2016
  44. Mohamed Shameer P, Ramesh K, Sakthivel R and Purnachandran R. “Effects of fuel injection parameters on emission characteristics of diesel engines operating on various biodiesel: A review”. ELSEVIER Science Ltd. Renewable and Sustainable Energy Reviews vol.67, pp.1267–1281. October 2016. Scopus, Thomson Reuters Indexed (Impact factor: 16.799)
  45. Bhuvanesh N, Ramesh K, Sakthivel R, “Investigation on the Effects of Antioxidant Additive in a DI-Diesel Engine Fuelled with Calophyllum inophyllum Methyl Ester Diesel Blend”, International Journal for Scientific Research & Development vol.3, 2016
  46. Sakthivel R, Ramesh K, “Experimental investigation on the effects of diesel and its blends on the performance and emission characteristics of a DI-diesel engine” International Journal of Applied Engineering Research vol.10, No.61 (SI) pp. 340-344. 2015. (Scopus Indexed)
  47. Sakthivel R and Mohamed Shameer P “Effect of Polyethylene Glycol in gas sensing behaviour of composite coating of Magnesium oxide and Aluminium oxide”, International Journal of Science and Research (IJSR), Volume 4 Issue 2. Page No 183-189. February 2015

AS REVIEWER:

  • Case Studies in Thermal Engineering - ELSEVIER Publication
  • Petroleum Science and Technology – TAYLOR AND FRANCIS Publication
  • Environmental Science & Pollution Research - SPRINGER Publication
  • Chemosphere - ELSEVIER Publication
  • ACS Omega –ACS Publication
  • Fuel Processing Technology - ELSEVIER Publication
  • Engineering Applications of CFD - TAYLOR AND FRANCIS Publication
  • Microchemical Journal - ELSEVIER Publication
  • Journal of Cleaner Production - ELSEVIER Publication
  • Energy Sources, Part A – TAYLOR AND FRANCIS Publication
  • Fuel - ELSEVIER Publication
  • Clean Technologies and Environmental Policy - SPRINGER Publication
  • International Journal of Vehicle Noise and Vibration – INDERSCIENCE
  • Applied Energy – ELSEVIER Publication
  • Heliyon - ELSEVIER Publication
  • Waste and Biomass Valorization - SPRINGER Publication
  • Energy and Environment - SAGE Publication
  • BioResources – NC State University Publication

CONFERENCES ATTENDED:

  • Presented a paper on “INFORMATION SYSTEM FOR AGRI TREATMENT USING VIRTUAL INSTRUMENTATION”, in the 2nd National Conference Innovative Ideas in Mechatronics (IIM 2011) held at Kumaraguru College of Technology, Coimbatore on 30th March 2011.
  • Presented a paper on “IMAGE PROCESSING USING VIRTUAL INSTRUMENTATION”, in the 1st International Conference in South Asia on Global Manufacturing Systems and Management (ICGMSM-2011) held at Coimbatore Institute of Technology, Coimbatore on 1st – 3rd August 2011.
  • Presented paper on “EXPERIMENTAL INVESTIGATION ON THE EFFECTS OF DIESEL AND ITS BLENDS ON THE PERFORMANCE AND EMISSION CHARACTERISTICS OF A DI-DIESEL ENGINE ”, in National conference, Frontiers in Mechanical, Automobile, Civil and Electrical Sciences, held at Tamilnadu Engineering College, Coimbatore on 15th May 2015.
  • Presented paper on “EFFECTS OF BIODIESEL AND ITS BLENDS WITH DIESEL ON THE PERFORMANCE AND EMISSION CHARACTERISTICS OF A DI-DIESEL ENGINE”, in International conference, CAASR-Innovative Engineering and Technologies (ICIET-2015), held at Bangkok, Thailand from 27th to 28th November 2015.
  • Presented paper on “DESIGN AND FABRICATION OF MESO-SCALE CAPACITIVE ACCELEROMETER”, in 4th International conference on Alternative Fuels, Energy  and Environment (ICAFEE-2019), held at Feng Chia University, Taichung, Taiwan on 19th & 20th October 2019.

COURSES ATTENDED:

  • Eleven days course on “C & C++” organized by Department of Mechatronics Engineering, Kongu Engineering College, Perundurai from 25th May to 4th June 2010.
  • Two days hands on workshop on “Designing and Building Robots” organized by Department of Mechatronics Engineering, Kongu Engineering College, Perundurai from 19th to 20th August 2010.
  • Two days hands on workshop on “Introduction to NI-robotics starter kit and smart camera” organized by Department of Mechatronics Engineering, Kongu Engineering College, Perundurai from 16th to 17th July 2011.
  • TEQIP II sponsored One day workshop on "Training & Demonstration of Biodiesel Rancimat", organized by the Centre of Excellence for Environmental Studies, Government College of Technology, Coimbatore held on 3rd February 2016.
  • One day national workshop on "Future scope in Automotive Emission control" organized by Department of Mechanical Engineering at Bannari Amman Institute of Technology, Sathyamangalam on 13th February 2016.
  • One day workshop on "Patenting Your Technology - Do By Yourself" organized by Department of Mechanical Engineering at Bannari Amman Institute of Technology, Sathyamangalam on 26th February 2016.
  • TEQIP II, Centre of Excellence on Alternate Energy Research sponsored One week National Level Workshop on "Solar and Wind Energy Conversion Systems - Hands on Training", organized by the Department of Electrical and Electronics Engineering, Government College of Technology, Coimbatore from 10th to 16th March 2016.
  • TEQIP II, Centre of Excellence on Alternate Energy Research Short Term Course on "Energy Resources Management in Current Scenario", organized by the Department of Mechanical Engineering, Government College of Technology, Coimbatore from 4th to 10th April, 2016.
  • TEQIP II sponsored One day Workshop on "Electronic Waste Management", organized by the Centre of Excellence for Environmental Studies, Coimbatore held on 16th April 2016.
  • TEQIP II sponsored One day Workshop on "Entrepreneurship Opportunities in Biodiesel Production From Waste", organized by the Centre of Excellence for Environmental Studies, Coimbatore held on 9th August 2016.
  • TEQIP II sponsored Faculty Development Program on "Research Avenues in Mechanical Engineering", from 31st October - 6th November, 2016.
  • TEQIP II sponsored Six days Workshop on “Biofuels and Combustion Research”, organized by the Department of Mechanical Engineering, National Institute of Technology, Trichy held from 26th September to 1st October 2016.
  • TEQIP II sponsored Seven days Workshop on "Bioenergy & its scope in India", organized by the Centre of Excellence for Environmental Studies, Coimbatore held from 24th February – 2nd March 2017.

 

TRAINING CLASSES HANDLED:

  • Handled GATE training classes for the students of Mechanical Engineering organized by GATEZONE at Sri Eshwar College of Engineering, Coimbatore
  • Handled GATE training classes for the students of Mechanical Engineering organized by GATEZONE at Coimbatore Institute of Engineering and Technology, Coimbatore
  • Handled core subject training classes for the students of Mechatronics Engineering at Kongu Engineering College, Perundurai during December 2017.
  • Handled AICTE-PRERANA sponsored GATE training classes for the students of Mechatronics Engineering at Kongu Engineering College, Perundurai during December 2019.

PERSONAL PROFILE:                       

NAME

R.Sakthivel

FATHER’S NAME

S.Rajamohan

DATE OF BIRTH

06.01.1991

AGE

32 years

PERMANENT ADDRESS

No 5, Deyvanai Nagar,Thiruppalaithurai, Papanasam, Thanjavur Dt-614205.

REFERENCE:

Dr. K.RAMESH,

Professor & Head,   

Department of Mechanical Engineering,

Government College of Technology,

Coimbatore-641013

Email id : kramesh@gct.ac.in

Mobile : +91-75980 20676 

Dr.M.GOVINDARAJU,

Asso.Professor,

Department of Mechanical Engineering,

Amrita Vishwa Vidyapeetham,

Coimbatore-641112

Email id : m_govindaraju@ch.amrita.edu

Mobile : +91 72073 59461

Dr.R.PARAMESHWARAN,

Professor,

Department of Mechatronics Engineering,

School of Building and Mechanical Sciences,

Kongu Engineering College,

Perundurai-638 052

Email id : paramesh_r@kongu.ac.in

Mobile : +91-98659 19915 

Prof.R.SURENDRAN,

Assistant Professor,   

Department of Mechanical Engineering,

Government College of Technology,

Coimbatore-641013

Email id : surengce@gct.ac.in

Mobile : +91-98405 87794 

 

Date: 13-12-23

Place: Coimbatore

 

UG
Academic Responsibility and Role: 
Faculty advisor - PTBE (2023 BATCH)
18