Name
Dr.S.PERIYASAMY
Earned Degree/Diploma
BE(Mech-DISTN), ME(Aero-DISTN), PhD, MISTE, MAeSI
Current Designation
Associate Professor
Department
Mechanical Engineering
Contact Phone Number
8754030606
Email (Official Preferred)
speriyasamy@gct.ac.in
Publications
Web of Science ResearcherID: X-2360-2018
Scopus id :55111321200
Number of PhD thesis completed : 9
PUBLICATIONS
Periyasamy, S. and Alwarsamy, T. “Analysis of block vibrations induced by combustion chamber pressure in a diesel engine”, Journal of Vibroengineering., Vol.14, No.1, pp.250-259, 2012. H Index - 19
2. Periyasamy, S., Alwarsamy, T. And Rajasekar, V. “Analysis on Combustion of a Primary Reference Fuel” International Journal of Engineering Science and Technology., Vol.4, No.5, pp.2244-2250, 2012.ISSN: 2141-2839.
3. Periyasamy, S. and Alwarsamy, T. “Combined Effects of Inertia and Pressure on Engine Vibration”, Journal of Vibration Control., Vol 19(16), pp.2469-2480.H Index – 54.
4. S.Periyasamy, M.Aravind, D.Vivek, Dr.K.S.Amirthagadeswaran, "Optimization of Surface Grinding Process Parameters for Minimum Surface Roughness in AISI 1080 Using Response Surface Methodology"Advanced Materials Research Vols. 984-985 (2014) pp 118-123, 2014.H Index – 28.
5. S.Periyasamy, Saravanan.M, "Experimental Studies on a Vapour Compression Refrigeration System using Hydrocarbon Mixtures and R-12 Refrigerant, International Journal of Engineering Research & Technology, Vol. 3, No. 5, pp.1070-1073,2014.SJ Impact Factor: 7.86.
6. Aravind.M, S.Periyasamy, "Optimization of Surface Grinding Process Parameters By Taguchi Method And Response Surface Methodology" International Journal of Engineering Research & Technology, Vol. 3, No. 5, pp.1721-1727,2014.SJ Impact Factor: 7.86.
7. S. Periyasamy, R. Alamuthu “Design of temperature based- separator with sensor on hot forging” International Journal of Modern Engineering Research, Vol.1, pp.106-116. IC value 5.09.
8. Sakthi Saravanan, Arun Prasad, S.Periyasamy, Pandian Sivakumar "KINETICS STUDIES ON CLEOME VISCOSA USING NANO MgO CATALYST FOR BIODIESEL
PRODUCTION" Journal of Chemical and Pharmaceutical Sciences, Special issue Vol-7, pp.121-
124.H Index – 11.
9. ArunPrasad, SakthiSaravanan, S.Periyasamy, P. Sivakumar "OPTIMIZATION OF VARIOUS PARAMETERS ON BOTRYOCOCCUS BRAUNII FOR BIODIESEL PRODUCTION USING NANO CaO CATALYST" Journal of Chemical and Pharmaceutical Sciences, Special issue Vol-7, pp.125-128.H Index – 11.
10.R.Bharathiraja,Dr.K.S.Amirthagadeswaran,N.Praveenkumar,S.Periyasamy, K.RameshBabu "Study on Characteristics of CI Engine Using Nano Additive Blended Diesel Fuel"International Journal of Applied Engineering Research, ISSN 0973-4562 Vol. 10 No.67 (2015).H Index – 35.
N. Praveenkumar, S.Periyasamy, R.Bharathiraja, B.Senthilkumar "Outlet Temperature Prediction Modelling and Analysis of Flat Plate Solar Collector Using Al2O3 Based Nano Fluid "International Journal of Applied Engineering Research, ISSN 0973-4562 Vol. 10 No.67 (2015).H Index – 35.
12. V.Santhosh, S. Periyasamy, P.Sivakumar, B.Vijayakumar, N.Yasvanthrajan, Muralidharan.N.G “Production of Biodiesel by Cinder Supported nano MgO/KF as the Heterogeneous Base Catalyst using Rapeseed Oil” Journal of Chemical and Pharmaceutical Sciences, ISSN 0974-2115 Special Issue 11, pp:80-82 (2015).H Index – 11.
13. A.Sakthi Saravanan, S. Periyasamy, P. Sivakumar, B. Vijayakumar, V. Santhosh, Muralidharan.N.G “Studies on Mixed Waste Vegetable Oil for Production of Biodiesel by using Mg/AlNO3 and KOH as Catalyst” Journal of Chemical and Pharmaceutical Sciences, ISSN 0974- 2115 Special Issue 11, pp:77-79.(2015).H Index – 11.
14. B.Dhamodharan, Dr.S.Periyasamy “Utilization of Waste Heat Recovery From Solar Panel”International Journal of Applied Engineering Research, ISSN 0973-4562 Vol. 10 No.88 (2015), pp:86-90.H Index – 35.
15. R.Prakash, M.Mahendran, R.Thirunavukkarasu, Dr.S.Periyasamy “Effect of Compression Ratio on Performance and Emission Characteristic Of Diesel on a VCR Engine with Single Hole Injector Nozzle”International Journal of Applied Engineering Research, ISSN 0973-4562 Vol. 10 No.88 (2015), pp:100-104.H Index – 35.
16. P.Xavier Vivek Paul, Dr.S.Periyasamy, S.Kumar “Optimization of Process Parameters of Friction and Wear Behavior of TiB2Reinforced In-Situ Composites” International Journal of Engineering research, ISSN 2321-7758 Vol. 4 Issue 3 (2016), pp:130-134.SJ Impact Factor:3.851.
17. .B.Dhamodharan, Dr.S.Periyasamy, “Analysis of Solar Cell with MGO Anti-Reflective Coating” International Journal for Scientific Research & Development, ISSN (online): 2321-0613, Vol. 4, Issue 04, 2016, pp-414-417.SJ Impact Factor: 4.396.
18. K.Gopinath, Dr.S.Periyasamy, “Vibration Analysis on Rotating Shaft Using Matlab” International Journal of Science Technology and Engineering, ISSN (online):2349-784X, Vol. 3, Issue 06, 2016, pp-248-252. SJ Impact Factor: 4.753.
19. A.Aravind Kumar, Dr.S.Periyasamy, “2-D CFD Analysis of Ring Airfoil UAV” International Journal of Science Technology and Engineering, ISSN (online):2349-784X, Vol.3, Issue 07, 2017, pp-192-195.SJ Impact Factor: 4.753.
20. A.A. Muhammad Irfan, Dr.S.Periyasamy, “Experimental Study on Diesel Engine using HeveaBrasiliensis Biodiesel Blend with Di Tertiary Butyl Peroxide Additive as fuel” International Journal of Engineering Research and Technology, ISSN:2278-0181, Vol.6, Issue 03,2017, pp - 408-411. SJ Impact Factor: 7.86.
21. M. Sanjai, S. Periyasamy, “Production Inventory Model with Reworking of Imperfect Items and Integrates Cost Reduction Delivery Policy, International Journal of Operational Research, Vol. 32, No. 3, 2018.H Index – 21.
22. M. Sanjai,S. Periyasamy, ‘An Inventory Model for Imperfect Production System with Rework and shortages’, International Journal of Operational Research,V,2017.H Index – 21
23. A.A. Muhammad Irfan, Dr.S.Periyasamy, “Investigation of Hevea Brasiliensis Blends with an Aid of Rancimat Apparatus and FTIR Spectroscopy” International Journal of Engineering and Technology, ISSN:2319-8613, Vol.9, Issue 04, 2017, pp - 2794-2799. SNIP: 0.81
24. A.Sakthi Saravanan, S. Periyasamy, P. Sivakumar “Production of Biofuel from Shorearobusta Seed Oil Using Nano MgO Catalyst” Springer Proceeding in Energy, Book ISBN 978-3-319- 63084-7, Chapter 16.(2017).
25.E. Saravanapprabhu, M. Mahendran, Dr. S. Periyasamy, “A Review Analysis of Effect of Variable Compression Ratio in Engine Using Turbocharger” IJSRSET-2017 (3)1, Themed Section: Engineering and Technology, ISSN: 2395-1990, pp309-312.SJ Impact Factor: 3.632. https://ijsrset.com/IJSRSET173171
26.D.Elumalai, T.Elavarasan, A.Dinesh Kumar, Prof. A.Vadivel, Dr. S. Periyasamy “A Review Study on Experimental Investigation on Improving Thermal Performance of IC Engine By Varying The Piston Coating And Using Biodiesel as a Blend” IJSART-2017- (3)1, ISSN : 2395- 1052, pp 213-220.SJ Impact Factor: 5.388.
27. Dr. S. Periyasamy, Mr. A. Vadivel “Investigation on Thermal Performance of Elliptical Piston Profile in Texvel Diesel Engine” International Journal for Scientific Research & Development| Vol. 5(05) 2017, ISSN : 2321-0613, pp 180-182.SJ Impact Factor:4.396.
28. Mohankumar.N, Dr. S. Periyasamy,“Flutter Analysis of Unmanned Aerial Vehicle Wing” International Journal for Science and Advanced Research in Technology (IJSART) , Vol. 4(01) 2018, ISSN : 2395-1052, pp 1015-1018.SJ Impact Factor: 5.388
29. M.Siva, Dr. S. Periyasamy,“Vibration Analysis of Internal Combustion Petrol Engine by Mathematical Model” International Journal for Science and Advanced Research in Technology(IJSART),| Vol. 4(01) 2018, ISSN : 2395-1052, pp 732-740.SJ Impact Factor: 5.388
30. D. Sathish, R. Thirunavukkarasu, Dr. S. Jegadeeswaran, Dr. S. Periyasamy “Experimental Investigation on Shallow Solar Pond Using CuO Nano Particles” Applied Mechanics and Materials-2018- Vol. 877, ISSN :1662-7482, pp 409-413.H Index - 26.
31. S.Madhankumar, Dr.K.Manonmani, Dr.S.Periyasamy, S.Rajesh, S.Kannaki “Experimental Study of Effect of Parameters on Material Removal Rate for Electrochemical Machining of Aluminium Matrix Composite” International Journal of Creative Research Thoughts- Volume 5, Issue 4 October 2017, ISSN : 2320-2882, pp 1062-1065.Impact factor : 5.97
32. R.Tamilselvan, R.Rameshbabu, R.Thirunavukkarasu, Dr. S. Periyasamy, “Effect of fuel injection timing on performance and emission characteristics of ceiba pentandra biodiesel” Materials Today: Proceedings 5 (2018) 6770–6779.SNIP: 0.837. H index - 11
33. R. Thirunavukkarasu , M. Mahendran, Dr. S. Periyasamy, R. Tamilselvan, “Investigation on Single, Four And Five Holes Fuel Injector Nozzle on Performance And Emission Characteristic of Diesel on A VCR Engine by Using Ceramic Coating Material on The Piston Crown” Materials Today: Proceedings 5 (2018) 7577–758.SNIP 0.837. H index - 11.
34. Arunprasad As, Periyasamy S, Sivakumar P, Sakthi Saravanan A & AnirbidSircar “Optimization and kinetic studies on biodiesel production from microalgae (Euglena sanguinea) using calcium methoxide as catalyst”, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, ISSN: 1556-7036 (Print) 1556-7230 (Online),Volume 41 Issue Number,
12 pp 1497-1507.SNIP 0.555. H index - 33.
35. N.Vivek Masthiraj, Dr.S.Periyasamy “An Investigation on Aeroelasticity Effects in Unmanned Aerial Vehicle” IJSART - Volume 4 Issue 9 – SEPTEMBER 2018 ISSN [ONLINE]: 2395-1052.SJ Impact Factor: 5.388
36.S. Ragul, S. Periyasamy “Numerical Investigation on High Performance Supercritical Airfoil using Co-Flow Jet Control” International Journal for Research in Applied Science & Engineering Technology (IJRASET), ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 6.887, Volume 6 Issue 12, Dec 2018.pp-915-927.
37.P. Sathish Kumar, S. Periyasamy, “Performance, Combustion and Emission Characteristics of a Diesel Engine Fuelled withthe Annona Squamosa Seed Cake Pyrolysis Oil” International Advanced Research Journal in Science, Engineering and Technology, Vol. 6, Issue 5, May 2019,pp-39-46.
38.Himanshu Choksi, Sivakumar Pandian, Sakthi Saravanan Arumugamurthi, Periyasamy Sivanandi, Anirbid Sircar & Vijaya Kumar Booramurthy “Production of biodiesel from high free fatty acid feed stock using heterogeneous acid catalyst derived from palm-fruit- bunch”, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, ISSN: 1556- 7036 (Print) 1556-7230 (Online),https://doi.org/10.1080/15567036.2019.1623953. May 2019, SNIP 0.555. Volume 43, 2021 - Issue 24, Pages 3393-3402, H index - 45.
39. B. Vibin, Dr. S. Periyasamy, “Cell Geometry Effect On The Vibration Behaviour of Sandwich Composite Structure” International Journal of Research in Advent Technology, Vol.7, No.3, March 2019 E-ISSN: 2321-9637,pp-1109-1112.
40. A. Ramkumar, Dr. S. Periyasamy , M. Syed Easa Faizal,“Investigation of Mechanical Properties of Al-SiC Hybrid Composite using Squeeze Casting Process” International Journal for Research in Applied Science & Engineering Technology (IJRASET) ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 7.177 Volume 7 Issue V, May 2019,pp-488-496.
41. S.Santhosh , S. Periyasamy, “Experimental Design For Single Degree Of Freedom Vibration System” International Journal of Research in Advent Technology, Vol.7, No.4, April 2019 E- ISSN: 2321-9637,pp-401-405.
42. I.Mohamed Akbarali, Dr.S.Periyasamy, Design and analysis of nozzle for reducing noise pollution, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN: 2278-1684,p-ISSN: 2320-334X, Volume 17, Issue 1 Ser. IV (Jan - Feb 2020), PP 06-12.
43.R. Tamilselvan, Dr.S.Periyasamy, Effect of Low Proportion Ceiba Pentandra Biodiesel Blend on Performance, Combustion and Emission Characteristics of a CI Engine, Journal of Alternative and Renewable Energy Sources, Volume-6, Issue-1 (January-April, 2020),pp 25-28.
44.Vignesh.E, Periyasamy.S, “Experimental Analysis in Knitted Fabrics GSM Calculation Performed With Heat Treatment Process” International Journal for Science and Advance Research in Technology ( IJSART) - Volume 6 Issue 4 – APRIL 2020,ISSN [ONLINE]: 2395-1052.
45.S. Periyasamy, S. Ragul, K. Sundararaj and P. S. Premkumar “Numerical Investigation on the Cold Flow Field of a Typical Cavity-based Scramjet Combustor with Double Ramp Entry , International Journal of Turbo & Jet-Engines” , eISSN 2191-0332, ISSN 0334-0082, DOI: https://doi.org/10.1515/tjj-2020-0011,May 2020. H index 21.
46. Saravanan.R , Periyasamy.S, “Analyzing The Effects of Various Factors on Emission During Combustion of N-Dodecane In Gas Turbine Engine” IJSART - Volume 6 Issue 4 – JUNE 2020,ISSN [ONLINE]: 2395-1052.
47. Dr.S.Periyasamy, I.Mohamed Akbarali,, “Numerical Investigation on Vibrational Characteristics of Glass Reinforced Polyester Composite Plate” International Journal of Engineering Research & Technology (IJERT),ISSN:2278-0181,Volume 9, Issue 6 , 12 June – 2020.
48. A. Vadivel and S. Periyasamy, “Experimental Investigation of Thermal Barrier (8YSZMGO-TIO2) Coated Piston used in Diesel Engine”, Journal of Applied Fluid Mechanics, Vol. 13, No. 4, July 2020. H index 26.
49. R. Thirunavukkarasu, S. Periyasamy, “Enhancing Diesel Engine Performance and Balancing Emissions with Effect and Contribution of MgO-ZrO2 and AT13 Layered Piston” Arabian Journal for Science and Engineering, https://doi.org/10.1007/s13369-020-04899-4, Issue 11/2020, 30.08.2020. H index 43
50. Arun Prasad Arunachalam Sivagurulingam, Periyasamy Sivanandi, Sivakumar Pandian, “Isolation, mass cultivation, and biodiesel production potential of marine microalgae identified from Bay of Bengal”Environmental Science and Pollution Research (2021), 2021 Aug 28. doi: 10.1007/s11356-021-16163-9. H index 113.
51. M. Mahendran , S. Periyasamy, Experimental Research to Predict Optimistic
Nanoparticle Additives Graphene oxide (GO) Diesel blend and optimistic operating condition by varying fuel injector holes, Journal of Environmental Protection and Ecology 22, No 1, 277–289 (2021), H index 20. https://scibulcom.net/en/article/0lwhscPe1HlHvfQHq5Np
52. A. Vadivel and S. Periyasamy, “Effect of Cerium Oxide Nanoadditive on Annona Methyl Ester in a Thermally Coated Direct Injection Diesel Engine”, International Journal of Ambient Energy, 2022, VOL. 43, NO. 1, 5992–6006. https://doi.org/10.1080/01430750.2021.1997810, H index 27.
53. Tamilselvan, R., Periyasamy S. “A novel investigation in the performance, combustion and emission characteristics of variable compression ratio engine using bio-diesel blends” Journal of Mechanical Science and Technology 36 (4) (2022) 1729~1738. http://doi.org/10.1007/s12206-022-0309-1
54. Sakthi Saravanan Arumugamurthi, Periyasamy Sivanandi & Senthilkumar Kandasamy “Biodiesel production from non-edible crops using waste tyre heterogeneous acid catalyst” Energy Sources, Part A: Recovery, Utilization, and Environmental Effects” 2022, VOL. 44, NO. 2, 3223–3238, https://doi.org/10.1080/15567036.2022.2062492
55. Krishnaraj Janarthanana and Periyasamy Sivanandi “Extraction and characterization of waste plastic pyrolysis oil for diesel engines” Journal of Cleaner Production, Volume 366, 15 September 2022, 132924, https://doi.org/10.1016/j.jclepro.2022.132924 , H index 232.
56. Depak Chakkaravarthy.R, Dr.S.Periyasamy, Dr.N.Nandakumar, “A Review of Micro Factory and Its Concept” International Advanced Research Journal in Science, Engineering and Technology, Vol. 9, Issue 2, February 2022, pp-223-227, DOI: 10.17148/IARJSET.2022.9230.
57. Hari vignesh M, Dr.S.Periyasamy, Dr.N.Nandakumar, “Review Paper on Unmanned Aerial Vehicles” International Advanced Research Journal in Science, Engineering and Technology, Vol. 9, Issue 3, March 2022, pp-96-98, DOI: 10.17148/IARJSET.2022.9316.
58. T. Harihara Sudhan, Dr.S.Periyasamy, Dr.N.Nandakumar, “A Review on Morphed Wing for Unmanned Aerial Vehicles” International Advanced Research Journal in Science, Engineering and Technology, Vol. 9, Issue 2, February 2022, pp-218-222, DOI: 10.17148/IARJSET.2022.9229.
59. A.Kaloshkar, Prof. S. Bradeesh Moorthy, Dr.S.Periyasamy, Dr.N.Nandakumar, “Design And Analysis of Composite Mono Leaf Spring : A Review” International Advanced Research Journal in Science, Engineering and Technology, Vol. 9, Issue 2, February 2022, pp-278-284, DOI: 10.17148/IARJSET.2022.9238.
60. P.Karthickraj, Dr.N.Nandakumar, Dr.S.Periyasamy “Review on Electroless Plating Ni–P Coatings For Improving Surface Performance of Steel” International Advanced Research Journal in Science, Engineering and Technology, Vol. 9, Issue 2, February 2022, pp-266-269, DOI: 10.17148/IARJSET.2022.9235.
61. Keerthi Kumar. G, Dr.N.Nandakumar, Dr.S.Periyasamy “Natural Fiber Reinforced Polymer Composite – A Review” International Advanced Research Journal in Science, Engineering and Technology, Vol. 9, Issue 2, February 2022, pp-228-242, DOI: 10.17148/IARJSET.2022.9231.
62. Senavaraiyan S, Dr. S. Ayyappan, Dr.S.Periyasamy, Dr.N.Nandakumar, “Metal Matrix Composite: A Review on Reinforcements of Aluminium And Methodologies” International Advanced Research Journal in Science, Engineering and Technology, Vol. 9, Issue 2, February 2022, pp-243-252, DOI: 10.17148/IARJSET.2022.9232.
63. M. Mohamed Siddiq, S. Parimala Murugaveni, Dr.S.Periyasamy, Dr.N.Nandakumar, “Study on Corrosion Behavior of Additively Manufactured Stainless Steel” International Advanced Research Journal in Science, Engineering and Technology, Vol. 9, Issue 7, July 2022, pp-31-40, DOI: 10.17148/IARJSET.2022.9706.
64. G. Teddy Jefri, Dr.N.Nandakumar, Dr.S.Periyasamy “A Review of the Hydrostatic Bearing System: Mechanical Investigation” International Advanced Research Journal in Science, Engineering and Technology, Vol. 9, Issue 2, February 2022, pp-259-265, DOI: 10.17148/IARJSET.2022.9234.
65. Udayashankar.E, Dr.N.Nandakumar, Dr.S.Periyasamy “A Review on Wear Theory” International Advanced Research Journal in Science, Engineering and Technology, Vol. 9, Issue 6, June 2022, pp-304-306, DOI: 10.17148/IARJSET.2022.9646.
66. Depak Chakkaravarthy.R, Dr.S.Periyasamy, Dr.N.Nandakumar, “Design and Development of Miniature Special Purpose Machine” Journal of Electronics Information Technology Science and Management, Vol. 12, Issue 7, 2022, pp-76-88.
67. Nandakumar Navaneethakannan, Periyasamy Sivanandi, Balakrishnan Somasekaran “Effect of Tool Geometry in Stir Zone for Hook Formation of Dissimilar Aluminium Alloys: A Parametric Investigation on Metallurgical and Mechanical Characteristics” Strojniški vestnik - Journal of Mechanical Engineering 68(2022)11, 693-701.
68. V.Santhosh, Siva Periyasamy “Qualitative improvement of bio‑oil derived from hydrothermal liquefaction of liquid fertiliser drained Kappaphycus alvarezii” Biomass Conversion and Biorefinery, Issue Date November 2023, Vol.13, 15295–15305 (2023) https://doi.org/10.1007/s13399-023-03749-1
69. Periyasamy Sivanandi, C Gupta, H Durai “A Review on Evolution of Aeroelastic Assisted Wing” International Journal of Aeronautical and Space Sciences, Issue Date July 2023, Volume 24, pages 652–688, (2023) https://doi.org/10.1007/s42405-023-00583-7.
70. Thirunavukkarasu Raja, Periyasamy Sivanandi, Sathish Dhandabani and Veeramanikandan Murugan “Exploratory of novel thermal barrier coating on diesel engine performance” Proc IMechE Part E: J Process Mechanical Engineering, DOI: 10.1177/09544089231190541, August 2023.
71. Dhanya Sree V, Nandakumar N, Periyasamy S, Rajeswari B “Development and characterization of graphene-based polymer composite” The International journal of analytical and experimental modal analysis, Page No: 403-410, ISSN NO: 0886-9367, Volume XV, Issue VIII, August/2023
72. S.Gunasekaran, Prof. R. Surendran, Dr.N.Nandakumar, Dr.S.Periyasamy “mechanical and wear behaviour of aluminium composite reinforced with chromium boride and chromium carbide” international journal of progressive research in engineering management and science (ijprems) pp : 255-259, e-ISSN : 2583-1062, Vol. 03, Issue 02, February 2023
73. J. Jeya Bala Murugan, Prof. S. Bradeesh Moorthy, Dr. N. Nandakumar, Dr. S. Periyasamy “Experimental investigation of microstructure and mechanical properties of tig welded dissimilar aluminum alloy aa6061/aa6063 at different welding current” e-ISSN : 2583-1062, pp : 88-90, Vol. 03, Issue 08, August 2023
74. Karthik S, Dr. S. Periyasamy , Dr. N. Nandakumar “Investigation of sealing effectiveness for a safety restraint automotive connector” e-ISSN : 2583-1062, pp : 487-490, Vol. 03, Issue 07, July 2023, DOI: https://www.doi.org/10.58257/IJPREMS31794
75. Kiran R, Dr. S. Periyasamy, Dr. N. Nandakumar “Design of hybrid wind-wave energy system” Journal of Emerging Technologies and Innovative Research (JETIR), Page No:f60-62, Volume 10, Issue 2, February 2023
76. Pranesh Kumar R, Nandakumar N, Periyasamy S “Design and development of levitating wind and solar power generator for enhanced clean energy generation” The International journal of analytical and experimental modal analysis, ISSN NO: 0886-9367, Page No: 411-417, Volume XV, Issue VIII, August/2023
77. Pranesh Kumar. R, N. Nandakumar, S. Periyasamy “A Novel Design and Development of Mortice Tubular Deadbolt Latch Mechanism” International Journal for Research in Applied Science & Engineering Technology (IJRASET), ISSN: 2321-9653, IC Value: 45.98, SJ Impact Factor: 7.538 Volume 11, Issue II, Feb 2023
78. S.Gunasekaran, Prof.R.Surendran , Dr.N.Nandakumar, Dr.S.Periyasamy “The improved forgeability properties of magnesium and silicon over IM25 aluminum alloy” Journal of Emerging Technologies and Innovative Research (JETIR), ISSN-2349-5162, Volume 10, Issue 2, February 2023
79. S.Sathrak yobu, Dr.N.Nandakumar, Dr.S.Periyasamy “Investigation and optimization on tribological dry wear behavour of LM24 aluminum composite alloy” Journal of Emerging Technologies and Innovative Research (JETIR) , ISSN-2349-5162, Volume 10, Issue 2, February 2023
80. S.Gunasekaran, Prof.R.Surendran , Dr.N.Nandakumar, Dr.S.Periyasamy “The strength within layers: analyzing PLA tensile strength in 3D printing” International Journal of Scientific Research in Engineering and Management (IJSREM), Volume: 07 Issue: 07 | July - 2023 SJIF Rating: 8.176 ISSN: 2582-3930
81. Venkataramana T G, Nandakumar N, Periyasamy S “Experimental investigation on properties of 3-d printed material using machine learning model” The International journal of analytical and experimental modal analysis, ISSN NO: 0886-9367 Page No: 384 – 388, Volume XV, Issue VIII, August/2023
82. Venkataramana T G, Nandakumar N, Periyasamy S “Static structural analysis of corn fibre reinforced composite” The International journal research in applied science and engineering technology (IJRASET), ISSN: 2321-9653, IC Value: 45.98, SJ Impact Factor: 7.538 Volume 11, Issue II, Feb 2023
83. M Saminathan, S Ayyappan, S Periyasamy, M Sivakumar “Experimental Investigations and Optimum Performance Evaluation of Wire-EDM Characteristics of Aluminium 6061-Magnesite Composites” Processes 12 (6), 1200. Published: 12 June 2024, doi.org/10.3390/pr12061200.
Book Chapters & Books:
| S.No | Title | Author’s Name | Publisher | Year of Publication |
| 1. | “Production of Biofuel from Shorearobusta Seed Oil Using Nano MgO Catalyst” | A.Sakthi Saravanan, S. Periyasamy, P. Sivakumar | Springer Proceeding in Energy, Book
| 2017 https://link.springer.com/chapter/10.1007/978-3-319-63085-4_16 Book ISBN: 978-3-319-63084-7
|
| 2. | Application of heterogeneous acid catalyst derived from biomass for biodiesel process intensification: a comprehensive review | Sivakumar Pandian, Sakthi Saravanan Arumugamurthi , Periyasamy Sivanandi, Mahula Santra and Vijaya Kumar Booramurthy | Academic Press, Elsevier | 2020
|
| 3. | OPTIMIZATION OF MICRO ELECTROCHEMICAL MACHINING OF INCONEL 625 USING TAGUCHI BASED GREY RELATIONAL ANALYSIS | Madankumar Seenivasan, Manonmani K Periyasamy S
| LAMBERT Academic Publishing | 2019
|
4. | “An investigation on sound analyser effects in whirling of shaft apparatus” | Dr.N.Nandakumar, Dr.S. Periyasamy | Book 2, Volume 26, Journal of Balkon and Tribological Association. | 2020 https://scibulcom.net/en/article/JZeb0GYm9ZqbLvlGIqEK
|
5 | Emission Analysis of Compression Ignition Engine with Induced Chemical Reaction Between Engine Exhaust and Slaked Calcium Hydroxide Solution | Vadivel Ayyakkannu, Periyasamy Sivanandi, Arivazhagan Sampathkumar | “Advances in Mechanical and Materials Technology” Springer, Singapore | 2022
|
6 | Experimental Investigation on Performance and Emission Characteristics of Low Heat Rejection Engine Operating on Biodiesel | Vadivel Ayyakkannu, Periyasamy Sivanandi, Arivazhagan Sampathkumar | “Advances in Mechanical and Materials Technology” Springer, Singapore | 2022
|
7 | The Complete Handbook of Industrial Safety Managing Hazards, Implementing Regulations, and Analyzing Risks | Dr.A.Sakthisaravanan, Dr.S.Periyasamy, Ms.SindhuBalakrishnan | Haiyagrev Publications | ISBN: 978-81-959812-6-7
August 2023 |
|
|
|
|
|
COPY RIGHTS
| S.No | Title | Author’s Name | Publisher | Year of Publication / Award |
1 | Plant Safety and Risk Analysis | Dr.A.Sakthisaravanan, Dr.S.Periyasamy, Ms.SindhuBalakrishnan | Intellectual Property India: Registration number: L-138929/2023 Diary number: 15915/2023-CO/L | 16/06/2023 |
PATENT
| S.No | Title | Author’s Name | Publisher | Date of Grant |
1 | OPTIMIZED SPUR GEAR DESIGN FOR | DR.S.PERIYASAMY , MR.S.AKASH PAVAN DR.S.JANAKI,
| Intellectual Property India: Patent No. : 505087 | 30/01/2024 |
LECTURE DELIVERED AS A RESOURCE PERSON at FDP and CONFERENCE:
| Sl.No. | Title | Date | Place |
| 1 | Heat and Mass Transfer | 17.12.2013 | Kumaraguru College of Technology, Coimbatore. |
| 2 | Innovative Developments in Mechanical Engineering – Conference Chair | 21.03.2014 | Anna University Regional Centre, Coimbatore. |
| 3 | Engineering Thermodynamics | 16.06.2014 | Sri Krishna College of Engineering and Technology, Coimbatore. |
| 4 | Engineering Thermodynamics | 21.06.2014 | Sri Krishna College of Engineering and Technology, Coimbatore. |
| 5 | Heat Transfer | 11.09.2014 | Karpagam University, Coimbatore. |
| 6 | FEM in Heat Transfer | 23.12.2014 | Sriguru Institute of Technology, Coimbatore. |
| 7 | ISRO Sponsored Workshop on “Small Spacecraft Technology” - Attitude Control System | 30.03.2015 | P.A.College of Engineering and Technology, Pollachi. |
| 8 | Mass Transfer | 09.05.2015 | Akshaya College of Engineering and Technology, Coimbatore. |
| 9 | Wind turbine dynamics | 28.05.2015 | Department of Electrical and Electronics Engg. Govt. College of Technology, Coimbatore. |
| 10 | Engineering Mechanics | 08.12.2015 | SNS College of Technology, Coimbatore |
| 11 | Thermal Engineering | 16.12.2015 | University College of Engineering, Villupuram. |
| 12 | Basic Concepts and First Law of Thermodynamics
| 13.06.2016
| Department of Mechanical Engineering Kalaignar karunanidhi Institute of Technology Coimbatore. |
| 13 | Properties of Pure Substance and Steam Power Cycle | 16.06.2016
| Department of Mechanical Engineering Kalaignar karunanidhi Institute of Technology Coimbatore. |
| 14 | Wind turbine blade design | 22.09.2016 | Department of Electrical and Electronics Engg. Govt. College of Technology, Coimbatore. |
| 15 | Advanced Flow Visualization | 01.11.2016 | Department of Mechanical Engineering Govt. College of Technology, Coimbatore. |
| 16 | Composite Materials | 26.05.2017 | University College of Engineering, Villupuram |
| 17 | Turbo machines | 09.06.2017 | MIT, Anna University, Chennai |
| 18 | Introduction to Finite difference method, Finite Volume method and Finite element method | 27.11.2017 | Sri Krishna College of Technology, Coimbatore. |
| 19 | Aircraft Combustion System | 09.01.2018 | Department of Aeronautical Engineering, Mahindra Engineering College, Namakkal. |
| 20 | Thermodynamics and Heat Transfer | 02.03.2018 | Govt Polytechnic college, Coimbatore. |
Academic Responsibility and Role
Faculty Advisor, Program coordinator- M.E., Engineering Design, NBA and NAAC member