Dr.P.Ilamathi

1. Arivumani Ravanan, Ilamathi Palanivel and Balamurugan Kulendran, ‘Microstructure, Tensile, and Fractography Analysis of Al2016 and Al2618 Age Hardened Aluminium Alloys’, Chiang Mai J. Sci. 2022; 49(4): 1217-1232. https://doi.org/10.12982/CMJS.2022.066.  
2. Ajaymanikandan Nagalingam, Ilamathi Palanivel and Thirumalai Ramanathan, ‘Assessment of Optimum Mechanical Properties for Friction Stir Welding of Pure Copper and Aluminium Bronze’ , Chiang Mai J. Sci. 2022; 49(4): 1-20. https://doi.org/10.12982/CMJS.2022.059  
3. Arivumani Ravanan, Ilamathi P, Balamurugan K, ‘Fatigue and Fractography Analysis of Artificially Age-hardened Al2016 High strength Aluminium Alloy’ International Journal of Innovative Research in Technology and Management, Volume-6, Issue-3, 2022,52-58, ISSN: 2581-3404 (Online).
4. Arivumani Ravanan, Ilamathi P and Balamurugan K, ‘Impacts Of Age Hardening In Microstructure Of Al2016 Aluminium Alloy At T6 Condition’, International Journal of Innovative Research and Advanced Studies (IJIRAS), Volume 9, Issue 6, June 2022.
5. Balakrishnan Somasekaran, Alwarsamy Thirunarayanaswamy, Ilamathi Palanivel ‘Synthesis of Graphene and fabrication of Aluminium-Grp nanocomposites: A review’, Materials Today: Proceedings, 2021 https://doi.org/10.1016/j.matpr.2021.10.262
6. Balakrishnan Somasekaran , Alwarsamy Thirunarayanaswamy, Ilamathi Palanivel ‘Green Synthesis of Clean Edge Graphene Nanosheets Using Natural Precursor’, Materiale Plastice,  58 (3), 2021, 210-216, ISSN 0025-5289.
7. Balakrishnan Somasekaran , Alwarsamy Thirunarayanaswamy, Ilamathi Palanivel ‘Tribological performance of aluminium hybrid self-lubricating composites reinforced with green synthesized graphene’, Materials Research Express, vol. 8 (2021) 096530, ISSN 2053-1591.
8. Senthilvel Santhakumar, Ilamathi Palanivel, Krishnanand Venkatasubramanian, ‘Building a low cost wind turbine in highways for rural house electricity demand, Environmental Progress and Sustainable Energy, WILEY-BLACKWELL, Vol. 38(1), 278-285, 2019. DOI 10.1002/ep.12917 ISSN: 1944-7442.
9. Senthilvel Santhakumar, Ilamathi Palanivel, Krishnanand Venkatasubramanian, ‘An experimental study on the rotational behaviour of a Savonius Wind Turbine for two lane highway applications’, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer, vol.40:232, 2018, pp. 1-12, ISSN: 1806-3691.
10. Senthilvel Santhakumar, Ilamathi Palanivel, Krishnanand Venkatasubramanian, ‘A study on the rotational behaviour of a Savonius Wind turbine in low rise highways during different monsoons’, Energy for Sustainable Development, vol.40, 2017, pp. 1-10, ISSN: 0973-0826.
11. Ragunath L, Senthilvel S, Dr.P.Ilamathi, “Hybrid Energy Generation Through Vertical Axis Savonius Wind Turbine and Solar Panel”, International Journal for Innovative Research in Science and Technology, Vol.2, No, 11, 2016, pp. 304 – 310. ISSN (online): 2349-6010.
12. P.Ilamathi, V.Selladurai, K.Balamurugan, Modelling and optimization of unburned carbon in coal fired boiler using ANN and GA, ASME Journal of Energy Resources Technology, Vol. 135, No. 3, 2013, pp. 032201-1 to 032201-4, doi:10.1115/1.4023328.
13. P.Ilamathi, V.Selladurai, K.Balamurugan, V.T.Sathyanathan, ANN – GA approach for predictive modeling and optimization of NOx emission in a tangentially fired boiler, International of Clean Technologies and Environmental Policy,  Vol. 15, No. 1, 2013, pp.125-131 - DOI 10.1007/s10098-012-0490-5.
14. P.Ilamathi, V.Selladurai, K.Balamurugan, ANN - SQP Approach for NOx emission reduction in coal fired boilers, International Journal of Emerging Electric Power Systems,  Vol. 13, No. 3, 2012, pp. 1–14.
15. P.Ilamathi, V.Selladurai, K.Balamurugan, A novel approach for modelling of NOx emission reduction in a tangentially fired coal boiler, International Journal of Oil, Gas and Coal Technology,Vol. 6, No. 4, 2013, pp.449–461.
16. P.Ilamathi, V.Selladurai, K.Balamuruan, Predictive modelling and optimization of power plant nitrogen oxides emission, International Journal of Artificial Intelligence Vol. 1, No. 1, March 2012, pp. 11-18.
17. K. Balamurugan, V. Selladurai and Ilamathi, Manufacturing facilities layout design using genetic algorithm, International Journal of Manufacturing Technology and Management (IJMTM), Vol. 14, Nos.3/4, 2008, pp. 461-474. 
18. K. Balamurugan, V. Selladurai and  Ilamathi, Facility layout design using genetic algorithm, Industrial Engineering Journal, Vol. XXXVI, No. 4, 2007, pp. 5-11.                 
19. K. Balamurugan, V. Selladurai and Ilamathi, Design and optimization of manufacturing facilities layouts, Journal of Engineering Manufacture (JEM), Vol. 220, No. 8, 2006, pp. 1249-1257.
20. K. Balamurugan and  Ilamathi, A quality function deployment approach to ERP business process design, Indian Journal of Information Science and Technology (IJIST), Vol. 1, Issue 2, 2006, pp. 21-27.
21. K. Balamurugan, Ilamathi and V. Selladurai, Fuzzy expert system for wire EDM process control, Journal on Manufacturing Engineering (JME), Vol. 5, Issue 2, 2006, pp. 7-9.
22. K. Balamurugan, V. Selladurai and  Ilamathi, Solving unequal area facility layout problems using genetic algorithm, International Journal of Logistics Systems and Management (IJLSM), Vol. 2, No. 3, 2006, pp. 281-301.
23. Ilamathi, K. Balamurugan, and V. Selladurai, Optimization of Multi-Objective Multi-pass Turning Operation using Genetic Algorithm, Journal of Manufacturing Technology and Management (MT&M), Vol. 1, No. 2, 2005, pp. 15-20.
24. K. Balamurugan, V. Selladurai and  Ilamathi, Solving facility layout problems using excel and genetic algorithm, Indian Journal of Information Science and Technology (IJIST), Vol. 1, Issue 1, 2005, pp. 43-52.
25. K. Balamurugan, V. Selladurai and Ilamathi, Application of simulation and genetic algorithm for facility layout design, Journal of Manufacturing Technology and Management (MT&M), Vol. 2, No. 1, 2005, pp. 3-7.
26. K. Balamurugan, V. Selladurai and  Ilamathi, Optimization of machine layout problems, Journal on Manufacturing Engineering(JME), Vol. 4, Issue 4, 2005, pp. 41-44.

CONFERENCE PUBLICATIONS:

1. Arivumani Ravanan, Ilamathi Palanivel, Balamurugan Kulendran and Basker Raja Joseph, “Fatigue and Fractographic Analysis of Al2016-T6 Artificial Age hardened Aerospace Al-Cu Alloy”, International Conference on Advanced Materials and Technologies for Industry 4.0 (ICAMT 4.0) held during March 23 & 24 – 2023 at Bannari Amman Institute of Technology, Sathyamangalam, Erode.
2. Arivumani Ravanan, P.Ilamathi, “Impacts of Age Hardening in Microstructure of A12618 Aluminium Alloy of T6 and T7 condition, International Conference on Artificial Intelligence, Materials Science and Renewable Energy (ICAIMSRE – 2022) held on 27^th and 28^th May 2022 at KIT – Kalaignar Karunanidhi Institute of Technology, Coimbatore.
3. Presented a paper titled “A review on surface modification in friction stir welding technology and its challenges” in the International conference on Science, Technology, Engineering and Management (ICSTEM ’19) held during 22-23, March 2019 at KIT – Kalaignar Karunanidhi Institute of Technology, Coimbatore.
4. Presented a paper titled “A review on metal ceramic composite materials through various processes” in the International conference on Science, Technology, Engineering and Management (ICSTEM ’19) held during 22-23, March 2019 at KIT – Kalaignar Karunanidhi Institute of Technology, Coimbatore.
5. Ragunath L, Senthilvel S, Dr.P.Ilamathi, “Hybrid Power Generation Through Solar and Vertical Axis Wind Turbine” International Conference on Fascinating Advancement Mechanical in Engineering (FAME 2016), 18-19, March 2016, pp 689 – 694.
6. Ponsenthil K K, Ilamathi P and Ganesan C, “Decision making analysis for location selection based on MCDM methodology” International Conference on Fascinating Advancement Mechanical in Engineering (FAME 2016), 18-19, March 2016, pp 270 - 273. 
7. K. Balamurugan, V. Selladurai and  Ilamathi, A genetic algorithm approach to facility layout problems 3^rd International Conference on Manufacturing Research (ICMR), Cranfield University, UK, Sep. 6-8, 2005.
8. K. Balamurugan, V.Selladurai and Ilamathi, Facility Layout Design using Simulation and Genetic Algorithm, XXXXV National Convention of IIIE, Visakapatnam, Dec. 12-14, 88-95, 2003.
9. K.Balamurugan, Ilamathi and A.T.Ravichandran, A Knowledge based methodology for the measurement of   Manufacturing Flexibility, National Conference on World Class Manufacturing, Amirta Institute of Technology, Coimbatore, May 7-9, 2003.
10. K.Balamurugan and Ilamathi, A Survey on Advanced Optimization Techniques and its Industrial Applications, National Conference on Advanced Manufacturing Technology, NSS College of Engineering, Palakkad, Feb. 15-16, 2003.
11. K.Balamurugan and Ilamathi, Modelling, Virtual Simulation and Flexibility Measurement of Flexible Manufacturing System (FMS), International Conference on Digital Aided Modelling and Simulation (DAMS 2003), organized by Coimbatore Institute of Technology, Coimbatore, Jan. 6-8, 2003.
12. Ilamathi and K.Balamurugan, Genetic Algorithm approach to optimize Multi-objective Multi pass Turning Operation”, International Conference on Operations Research for Development (ICORD 2002), ORSI Chennai & Bangalore Chapter,, Chennai, Dec. 27-30, 2002.
13. K.Balamurugan and Ilamathi, Flexible Manufacturing System Layout design and analysis through Simulation, National Conference on Future Trends in Mechanical Engineering Research & Development, Bharath Institute of Science & Technology, Chennai, Dec. 13-14, 2002.
14. Ilamathi, K.Balamurugan and C.Sasikumar, Fuzzy Java Expert System Shell (FJESS) for CNC Wire EDM process, National Seminar on Recent Trends in Production and Industrial Engineering, G. Pulla Reddy Engineering College, Hyderabad, Dec. 9, 2002, pp. 154-158.
15. K.Balamurugan and Ilamathi, Quick Response Manufacturing – A Complete Business Enabler for 21^st Century, National Seminar on Recent Trends in Production and Industrial Engineering, G. Pulla Reddy Engineering College, Hyderabad, Dec. 9, 2002, pp. 103-109.

RESEARCH ACTIVITIES:

Details of Ph.D Guidance :

Supervisor Number  : 2320118

No. of Ph.D Guided   : 3

*Joint Supervisor

No. of Present Scholars     : 3  Ph.D. scholars.

Training Programme / Guest lecture organized as Co-ordinator:

1. A talk on the topic “Mental Health in Youth” by Dr.G.Raghuthaman, Psychiatrist, PSG Institute of Medical Sciences & Research is organized for faculty members on 19.07.2018.
2. Training on “Soft Skills Development & Interview Etiquettes” for final year students from 16.08.2018 to 18.08.2018.
3. TAFE campus connect workshop on “TQM & Six Sigma” for third year Production and Mechanical and second year P.G. Mechanical students on 18.09.2018.
4. Webinar session on “How to prepare for placements” for selected third and final students by Mr. Hari Senthil Kumar, Director, Business Intelligence and Analytics, QuVa Pharma, Inc, USA on 06.10.2018.
5. Guest Lecture  on “Business Operations” by Mr. Rajkaal K Prabhu, Managing Director, M/s Ranjith Enterprises, Coimbatore for second year students on 24.01.2019.
6. An eye opener training session on “Soft Skills for Success” by Mr.R.Saravana Kumar, Ex-Director of CTS (Cognizant) is organized for the benefit of final year students of all departments on 02.07.2019.
7. An expert discussion on the topic “Should we patent (protect our ideas) or should we keep it as an open source?”  by Dr. Arun Kumar, an expert in IPR and Patent Filing, is organized for the benefit of faculty members and students on 05.08.2019.
8. TEQIP III sponsored guest lecture on "Opportunities available for pursuing higher studies abroad and the challenges we may face” by Dr. Prasanna Pavani, Founder & CEO of Exnodes, USA, is organized for  third year and final year students 29/08/2019.
9. TEQIP III sponsored guest lecture on “Introduction to Six Sigma” by Er. T. Sowmyan, Consultant, Quality Management, is organised to all the third year and final year Production Engineering students on 30/09/2019.
10. AICTE sponsored 5 Days ATAL FDP on “3D Printing for Engineers” is organized for the faculty members of Engineering and polytechnic colleges from 29.10.2019 to 02.11.2019.
11. Student Excellence & Learning Program (SELP) held under TEQIP III at GCT, Coimbatore for the benefit of final year Production Engineering students from 20.01.2020 to 25.01.2020.
12. Webinar on “Higher studies at International Universities” by Mr.S.Prasanna Krishna, Chief Counselor, Career Zone, Coimbatore is organized for the benefit of third year Production Engineering students on 15.06.2021.

Training Organized as co-coordinator:

1. TAFE campus connect workshop on “Manufacturing Technology – Forgings & Gears” for third year Production and Mechanical and second year P.G. Mechanical students on 21.08.2018.

​Video Lectures Prepared:

Introduction to Operations Research:

https://youtu.be/itdyz8pSzzU

Linear programming:

Formulation of LPP and Graphical Method

https://youtu.be/MFM88JVZn54

Simplex method - Maximization Problem

https://youtu.be/CsRGWUQdyhQ

Simplex method - Special cases

https://youtu.be/r4mlBDeQjkM

Simplex method - Artificial Variable Technique

https://youtu.be/EQjLTNSOw4w

Linear Programming - Duality Theory

https://youtu.be/8p948bkYOeM

Linear Programming - Dual Simplex Method

https://youtu.be/gZX0rCD69hY

Transportation Problem:

Transportation Problem - Initial Basic Feasible Solutions

https://youtu.be/jNimUUJDU2w

Transportation Problem - Optimal Solution

https://youtu.be/_LO89psgoy8

Assignment Problem:

Assignment Problem - Hungarian Algorithm

https://youtu.be/FvjkO8J0UpY

Assignment Problem - Special cases

https://youtu.be/36ePURKrL98

Sequencing Problems:

Sequencing Problems - Introduction, n jobs through one machine

https://youtu.be/43C7EJ0DAlM

Sequencing Problem - n jobs through more than one machine

https://youtu.be/4_UHH8myj0o

Sequencing Problems - 2 jobs through m machines

https://youtu.be/4BLFMFMjIgo     

Network Models:

Network Flow Models

https://youtu.be/T2yTRyHKxFc

Project Network Models - Network diagram construction, CPM Procedure

https://youtu.be/liUBnfAh2_4

Critical Path Method (CPM)

https://youtu.be/chId6KH0EGI

Programme Evaluation and Review technique (PERT)

https://youtu.be/AOiVidLqSaQ

Project Network Models - Crashing of Networks

https://youtu.be/DQYT3l1_lI0

Queuing theory:

Queueing Theory - Introduction, single server model

https://youtu.be/gQSGlue1V_Q

Queueing Theory - Single Server Model Problems

https://youtu.be/zPEDnwP_ISA

Queueing Theory - Single server with constant service model

https://youtu.be/mwglzFqT4sk

Queueing Theory - Single server with finite capacity model and Multi server model

https://youtu.be/uKQ_x465wlM

Monte Carlo Simulation

https://youtu.be/DRWkSoIJQTw

Game Theory:

Game theory - introduction, Pure strategy problem

https://youtu.be/Y1I1NvOikNg

Game theory - mixed strategy, dominance property

https://youtu.be/SSaixxsb5Iw

Game theory - analytical method, graphical method

https://youtu.be/PqcHGf0AyKI

Replacement theory:

Replacement methods -introduction, item deteriorate with time without considering time value of money

https://youtu.be/bB5droUgFz8

Replacement methods - items that deteriorate with time with considering time value of money

https://youtu.be/682BCgsmmWc

Replacement methods - sudden failure

https://youtu.be/tHjkvqetnYU

FDPs / Workshops attended since date of joining:

1. One day NPTEL workshop conducted on 09.04.2013 at GCT, Coimbatore organized by National Programme on Technology Enhanced Learning (IIT Madras).
2. One week TEQIP II sponsored FDP on “Pedagogy and Professional Communication” from 22.05.2013 to 28.05.2013 conducted by Department of English, GCT, Coimbatore.
3. One week TEQIP II sponsored FDP on “Strategies for effective Student-Teacher Interaction” from 29.05.2013 to 04.06.2013 conducted by Department of Humanities, GCT, Coimbatore.
4. TEQIP II sponsored two day workshop on “PLC based advanced automation” on 27.08.2013 and 28.08.2013 conducted by Department of Production Engineering, GCT, Coimbatore.
5. One day Quality Improvement Cell workshop conducted on 23.01.2014 at GCT, Coimbatore.
6. Two week ISTE workshop on “Pedagogy for effective use of ICT in Engineering Education” conducted by IIT, Bombay from 12.06.2014 to to 02.08.2014. (Online activity equivalent to one week from 15.06.2014 to 23.07.2014 and 27.07.2014 to 02.08.2014, Physical participation at Remote center from 12.06.2014 to 14.06.2014 and 24.07.2014 to 26.07.2014).
7. TEQIP II sponsored two day workshop on “Learning Assessment and Evaluation” on 01.10.2014 and 02.10.2014 at GCT, Coimbatore.
8. SPFU-TEQIP sponsored workshop on “Implementation of Outcome Based Education” on 21.04.2015 and 22.04.2015 at Thiagarajar College of Engineering, Madurai.
9. AICTE sponsored FDP on “Recent trends in testing of automobile systems and components” from 03.05.2015 to 16.05.2015 organized by Department of Automobile Engineering at PSG College of Technology, Coimbatore.
10. TEQIP II sponsored two day workshop on “Choice Based Credit System” on 10.07.2015  and 11.07.2015 conducted by GCT, Coimbatore.
11. TEQIP II sponsored one week FDP on “Solar PV and Wind Energy system design and applications with simulation software” organized by Department of Electrical and Electronics Engineering” GCT, Coimbatore from 21.09.2016 to 27.09.2016.
12. TEQIP-II Sponsored One week FDP on “Research Avenues in Mechanical Engineering” organized by Department of Mechanical Engineering, GCT from 31.10.2016 to 06.11.2016.
13. AICTE sponsored Two Week FDP on “Engineering Entrepreneurship” from 27.11.2016 to 11.12.2016 organized by Department of Mechanical Engineering, IRTT, Erode.
14. TEQIP-II Sponsored One week FDP on “Environmental approaches in Material Characterisation” organized by Department of Mechanical Engineering, GCT from 12.02.2017 to 18.02.2017.
15. TEQIP-II Sponsored One week FDP on “Bio Energy and its scope in India” organized by Department of Civil Engineering, GCT from 24.02.2017 to 02.03.2017.
16. AICTE sponsored Two Weeks FDP on “Industrial Automation” from 20.11.2017 to 03.12.2017 organized by Department of Electronics & Instrumentation Engineering, Sri Ramakrishna Engineering College, Coimbatore.
17. TEQIP-III Sponsored One day workshop on “e-Procurement – Principles and Practices” at Government College of Technology on 26.10.2018.
18. TEQIP-III Sponsored One week FDP on “Experimental Design, Predictive Modelling and Optimization Tools” organized by Department of Mechanical Engineering, GCT from 12.12.2018 to 18.12.2018.
19. AICTE Sponsored Two week FDP on “Recent Developments of Carbon Nanotubes in Renewable Energy Conversion and Storage” from 12.06.2019 to 25.06.2019 at Coimbatore Institute of Engineering and Technology, Coimbatore.
20. TEQIP-III Sponsored One week FDP on “Advanced Pedagogy, Sponsored Research, IPR & Entrepreneurship” organized by Department of Industrial Biotechnology, GCT from 22.07.2019 to 26.07.2019.
21. TEQIP-III Sponsored One week FDP on “Multidisciplinary Innovations in Engineering and Science for Sustainable Development” organized by Department of Mechanical Engineering – Engineering Design, GCT alongwith NIT, Arunachal Pradesh from 05.08.2019 to 09.08.2019.
22. TEQIP-III Sponsored two days workshop on “Outcome Based Education and NBA Accreditation” organized by Department of Information Technology, GCT on 13.08.2019 and 14.08.2019.
23. DST sponsored one day state level technical seminar on “Intellectual Property Rights” jointly organized by Tamilnadu State Council for Science and Technology and GCT, Coimbatore on 27.09.2019.
24. TEQIP-III Sponsored One day workshop on “Non-Destructive Testing and its Industrial Applications”  organized by Mechanical Engineering – P.G. Manufacturing Engg, GCT on 30.09.2019.
25. TEQIP-III Sponsored One day seminar  on “Stress Management and Professional Excellence” organized by Department of Industrial Biotechnology, GCT, Coimbatore on 10.10.2019.
26. AICTE sponsored 5 Days ATAL FDP on “3D Printing for Engineers” organized by Department of Production Engineering, GCT, from 29.10.2019 to 02.11.2019.
27. Faculty Training Programme on “Energy Efficiency and Management”, at IIT Bombay from 13.03.2020 to 15.03.2020.
28. TEQIP-III sponsored Two day FDP on “Design, Develop and Deliver online courses through MOODLE platform" - through On-Line mode on 23.04.2020 and 24.04.2020.
29. Panel discussion on "Engineering Education in Post COVID -19 Era: Way Forward" on 18.06.2020.
30. BSNL three weeks industrial training on "Mechanical Engineering Applications in Telecom Industry" at BSNL, Coimbatore from 30.06.2020 to 20.07.2020.
31. TEQIP III Sponsored online workshop on “Teach to influence (T2i)” organized by the internal quality assurance cell, Government college of technology, Coimbatore on 11.07.2020, 18.07.2020 and 25.07.2020.
32. TEQIP III sponsored One day Webinar on “Digital Teaching – How to handle effective online classroom” Organised by the Internal Quality Assurance Cell, Government College of Technology, Coimbatore, August 11, 2020.
33. Webinar on “Women Empowerment Through Legal Protection” organized by the Women Empowerment Cell, Government College of Technology, Coimbatore on 22.02.2021.
34. TEQIP-III sponsored webinar on “Artificial Intelligence in Automobile Industries” organized by Department of Mechanical Engineering – PG, Government College of Technology, Coimbatore on 06.03.2021.
35. TEQIP-III sponsored two days workshop on “National Education Policy 2020” organized by Department of Electronics and Communication Engineering, Government College of Technology, Coimbatore on 08.03.2021 and 09.03.2021.
36. TEQIP-III sponsored Product Development workshop on “Soap Making Processes” organized by Department of Industrial Biotechnology, Government College of Technology, Coimbatore on 10.03.2021.
37. TEQIP-III sponsored two days workshop on “Entrepreneurship Development, Innovation and Startup” organized by Department of Production Engineering, Government College of Technology, Coimbatore on 12.03.2021 and 13.03.2021.
38. AICTE sponsored online STTP on “Additive Manufacturing of Multi-functional Nanocomposites” from 21.06.2021 to 25.06.2021 conducted by IRTT, Erode.
39. Webinar on “Methods and Avenues for Sponsored Research and Technical Collaborations” organized by Internal Quality Assurance Cell - Research Innovations and Extension Team, Government College of Technology, Coimbatore held on 31.08.2021.
40. Online Webinar on “Design and Implementation of Curriculum as per National Education Policy – 2020” on 29.09.2021 and 01.10.2021.
41. Workshop on “NAAC Accreditation Metric Driven Methodology – An Overview” on 09.10.2021.
42. One week Online Training Programme on “Non Traditional Machining” conducted by National Institute of Technical Teachers Training and Research, Chennai from 31.01.2022 to 04.02.2022.
43. Two week Industrial Training at M/S Charvi Ring Products, Coimbatore from 30.05.2023 to 12.06.2023.
44. One day workshop on “Quality Assurance and Sustenance in Higher Education” on 30.11.2023 organized by Internal Quality Assurance Cell, GCT. Coimbatore.
45. One week Online Training Programme on “Entrepreneurship in the Digital age” conducted by National Institute of Technical Teachers Training and Research, Chennai from 08.01.2024 to 12.01.2024.